Stair Climber SS02 Operating Instructions

The stair machine panel adopts the capacitive touch principle, and the user can use only one touch at a time, and the touch effect is comparable to the mobile phone screen. The surface of the panel is made of acrylic, which is wear-resistant and durable, and has a beautiful color and beautiful appearance. It fully guarantees that there will be no problems such as wear and tear on the paint after a long time.

 

 

First, Windows：

1."TIME/HIGH” window: display the movement time and climb height. The time is positive from 0:00-99:59. When it is timed to 99:59, it will be cleared and restarted. The climb height is from 0.0 to 999.9, counting Cleared to 999.9 and restarted counting；

2.“CAL” window: displays the calorie value of the athlete, counting from 0.00 – 999.9, will be cleared and restarted when counting to 999.9；

3."STEP" window: display the number of steps of the athlete, the positive count is 0-999, and will be cleared when the count reaches 999.；

4."Central dot matrix display area window": This area is WELCOME display area, level and program progress chart, etc.；

5.“The green display tube above”: is a circular runway with a circle of 400 meters.；

6."Left LED display area window": This area displays the current motion mode indicator；

7.“Right number key”: is the level direct selection button, you can directly input the required level, click to confirm.；

 

Second, Keyboard Function：

1."PRO"  is the program key: in standby mode, press this button to cycle through “BIM”, “TIME COUNT”, “DISTANCE COUNT” “CALORIES COUNT”, “Heart Rate”; Proset program P1-P8; The P1-P8 is as following form:

P1	3	3	5	5	4	4	6	6	8	8	7	7	8	8	7	7	5	5	4	4
P2	3	3	4	4	5	5	8	8	9	10	7	7	6	6	5	5	4	4	3	3
P3	3	3	5	5	5	7	7	7	7	9	9	6	6	7	7	5	4	4	3	3
P4	3	3	5	5	7	7	10	10	7	7	10	10	5	5	3	3	4	4	4	3
P5	4	4	6	6	8	8	10	10	8	8	6	6	4	4	3	3	4	4	3	3
P6	2	2	4	4	6	6	8	8	10	10	8	8	6	6	4	4	3	3	2	2
P7	1	1	1	1	5	5	5	5	8	8	8	8	6	6	5	5	5	5	4	4
P8	2	2	4	4	6	6	4	4	6	6	4	4	6	6	4	4	5	5	3	3

 

2. "REST" is the return button: press this button to return to the standby interface；

3．“START/STOP”: If the power is switched on and safe lock is ok,the treadmilll can be started or stopped by  pressing this key at anytime

4. “+” and “-” are the level addition and subtraction keys; the standby state is used to adjust the set value. It is used to adjust the level after starting, and the adjustment range is 1/time.

5. "1, 2, ... 9, 0, Delete, ok" is a level shortcut.

 

Third, Machine debugging process:

1. Shake the handrail of the machine by hand to confirm that the machine is stable.

2. Turn on the power, energize the machine, step on the stair machine, press all the buttons on the electronic watch, observe whether each button corresponds to the function it indicates, whether the button is valid and the hand feels good;

3. Press the "    " key to start the operation of the stair machine, the running level is 1, then check whether the components of the stair machine are running normally.

 

Fourth, Manual mode:

In the standby state, directly press the “START/STOP” button, the stair machine runs at level 1 speed, other windows start counting from 0, click “+” “-” button to change the running level, and the running level can also be clicked. The numeric keys are directly input; the Delete button is the undo button, and Ok is the confirmation button;

 

Fifth, Photoelectric switch description

The photoelectric switch is placed in the lower right corner of the step. When the object is blocked, the stair machine will stop immediately, which is used for safety assurance. When using, ensure that the photoelectric switch has no problem; in non-emergency situations, the photoelectric opening should not be used to achieve the purpose of shutdown;